The maximum number of products that can be compared is 4. Please refine your selection.
Computer Accessories
Featured Products
Featured Products
Product Code: 7112695
Product Code: 7115845
Product Code: 7115863
Product Code: 7115856
Shop By Category
Results 1Â - 12 of 19 in
-
Product Code: 7001981- Type: Foot Rest
- Material: Steel, Memory foam top
- Platform size: 450(w) x 300(d)mm
- Dimensions: 450(w) x 300(d) x 250(h)mm
- Weight: 2.38kg
- Colour: Grey
- OEM: 56151
-
Product Code: 7043814- Scan Engine: High Performance Linear Imaging Engine
- Light Source: 630 nm visible red LED
- Scan Pattern: Single Line
- Scan Rate: Dynamic scanning rate up to 500 scans/sec
- Contrast Ratio: 20% minimum reflective difference
- Resolution: Minimum 3 mil (Code 39, PCS 0.9)
- Depth of field: More then 60 cm on 100% UPC/EAN symbols, More then 86 cm on 20 mil code 39
- Pitch Angle: +/- 65 deg.
- Skew Angle: +/- 65 deg.
- Ambient Light Immunity: 0 to 100000 Lux
- Symbologies supported: Code 39, Code 39 Full ASCII, Code 32, Code 39 Trioptic, Code 128, UCC/EAN-128, Codabar, Code 11, Code 93, Standard & Industrial 2 of 5, Interleaved & Matrix 2 of 5, German Postal Code, China Postal Code, IATA, UPC/EAN/JAN, UPC/EAN/JAN with Addendum, Telepen, MSI/Plessey & UK/Plessey, GS1 DataBar (formly RSS) Linear, Linear-stacked.
- Programming Method: Bar code command, Windows Utility - Fuzzyscan Powertool, Condensed Data Wizard via bar code command, Full featured Data Wizard via Fuzzyscan Powertool
- Indicators/Controls: 3 LED's for Power, good read, and Status Indicators
- Programmable Beeper: Optional Vibrator (Special Order with MOQ)
- Operating Modes: Toggle, Trigger, Force, Level, Flash, Diagnostic Alternative, Low power, Presentation.
- Communication Type: Corded
- Interfaces: PS2 Keyboard wedge, Direct PS2 Keyboard link, Standard RS-232, HID USB, USB Virtual COM Port, Laser and Wand emulation
- Supply Voltage: 5 VDC
- Power Consumption: Operating: Typical 180 mA at 5VDC, Standby: Typical 80 mA at 5VDC
- Drop Specification: Withstands 50 drops at 1.8 m to concrete, Withstands 10 drops at 2 m to concrete
- Environmental Sealing: IP41
- ESD Protection: Functional after 15kV discharge
- Operating Environment: -10 to 50C, RH 5% to 95% non condensing
- Storage Environment: -40 to 70C, RH 5% to 95% non condensing
- EMC/Safety Standards: FCC Part 15 Class B, ICES-003 Class B European Union EMC Directive (CE), Taiwan EMC (BSMI), LED Eye Safety IEC60825-1, EN60825-1 (Do not stare into LED Beam)
- External Dimensions: 70.5(w) x 97.8(d) x 156.2(h)mm
- Weight: 157g (excluding the cable)
- Colour: Black
- Warranty: 24 months
- OEM: FBC780BKITU
-
Product Code: 7054439- Maximum width (from the centres of two outside monitor mount): 1346.2mm
- Maximum reach depth (from base towards the user): 673.1mm
- Maximum height (from desktop to centre of each monitor mount - when the arms are located at the base of the centre pole): 400mm
- Colour: Black
- Suitable for: Monitor
- Dimensions: 889.0(h) x 1346.2(w) x 152.4(d)mm
- Weight: 7.82kg
- Units per Master Carton: 1
- Material Type: Aluminum
- Retail Pack Dimensions: 184.2(h) x 323.9(w) x 603.3(d)mm
- Retail Pack Weight: 9.64kg
- UPC Code: 043859716975
- Weight Capacity: 9kg
- OEM: 8042601
- Due to freight costs, some orders may incur a delivery charge and this will vary depending on the order, particularly in regional areas. Delivery costs can be confirmed at the time of order. Some items require assembly, if you need help this can be advised at the time of order. A service fee for assembly/installation may also apply. Delivery lead times may apply to some items, this can be confirmed at the time of order
-
Product Code: 7069835- Device Support Type: Monitor
- Material Type: Aluminum
- Features: Rotates 360 degree, NT
- Depth Adjustability: 88.9 - 457.2mm
- Accessories: Cord Management, USB Hub
- Number of Height Adjustments: Infinite with Height Range
- Weight Capacity: 3.62 - 9.97kg
- Dimensions: 885.95 x 1025.65 x 114.3mm
- Warranty: 3 Year Limited
- Colour: Black
- OEM: 8043401
- Due to freight costs, some orders may incur a delivery charge and this will vary depending on the order, particularly in regional areas. Delivery costs can be confirmed at the time of order. Some items require assembly, if you need help this can be advised at the time of order. A service fee for assembly/installation may also apply. Delivery lead times may apply to some items, this can be confirmed at the time of order
-
Product Code: 7069836- Type: Monitor Arm - Single monitor
- Mounting: Wall mounted
- Material: Aluminum
- Rotation: +/- 3 degree
- Tilt: +5 to -15 degree
- Pan: +/- 90 degrees
- VESA: 75 x 75mm, 100 x 100mm, 200 x 200mm, 100 x 200mm
- Weight capacity: 30kg
- Monitor Capacity: 42 inch
- Dimensions: 477.8 x 225.4 x 514.4mm
- Colour: Black
- Warranty: 3 Years
- OEM: 8043501
- Due to freight costs, some orders may incur a delivery charge and this will vary depending on the order, particularly in regional areas. Delivery costs can be confirmed at the time of order. Some items require assembly, if you need help this can be advised at the time of order. A service fee for assembly/installation may also apply. Delivery lead times may apply to some items, this can be confirmed at the time of order
-
Product Code: 7072406- Colour: Black
- Dimensions: 428(W) x 460(D) x 100(H)mm
- OEM: CR4100L0GD
- Due to freight costs, some orders may incur a delivery charge and this will vary depending on the order, particularly in regional areas. Delivery costs can be confirmed at the time of order. Some items require assembly, if you need help this can be advised at the time of order. A service fee for assembly/installation may also apply. Delivery lead times may apply to some items, this can be confirmed at the time of order
-
Product Code: 7072405- Construction Material: Steel Drawer, Plastic Coated Steel front; Plastic Note clips, Screw-less tamper resistance design
- Opening Rails: Nylon Rollers
- Media slots: 2 Slots
- Lock: 3 Position, Multiple Keyed Locks
- Coin Departments: 6 Fixed
- Note Departments: 5 Adjustable
- Drawer Feedback: Drawer Open Micro switch
- Interfaces: (CR3100) Printer or System Driven 10 to 30V Solenoid with RJ12 Connector
- Weight: 6.7 Kg
- External Dimensions: 400(w) x 410(d) x 85(h)mm
- Colour: Black
- OEM: CR3100L0GD
- Due to freight costs, some orders may incur a delivery charge and this will vary depending on the order, particularly in regional areas. Delivery costs can be confirmed at the time of order. Some items require assembly, if you need help this can be advised at the time of order. A service fee for assembly/installation may also apply. Delivery lead times may apply to some items, this can be confirmed at the time of order
-
Product Code: 7073844- Type: Quad Monitor Arm
- Material: Metal
- Mount Type: Clamp
- Max Size Rating: 30 inch Monitor
- Max Load Rating: 10kg
- Height Range: 660mm
- Weight: 8.5kg
- Colour: Black
- Warranty: 3 Years
- OEM: RMA4 BL
- Due to freight costs, some orders may incur a delivery charge and this will vary depending on the order, particularly in regional areas. Delivery costs can be confirmed at the time of order. Some items require assembly, if you need help this can be advised at the time of order. A service fee for assembly/installation may also apply. Delivery lead times may apply to some items, this can be confirmed at the time of order
-
Product Code: 7074338- Type: Monitor arm - Double
- Mounting: Desk mounted
- Material: Aluminium
- VESA Monitor mounting: VESA 75mm and 100mm
- Capacity: 30 inch monitor
- Colour: White
- Warranty: 10 Years
- OEM: AEMCUT2WH
- Due to freight costs, some orders may incur a delivery charge and this will vary depending on the order, particularly in regional areas. Delivery costs can be confirmed at the time of order. Some items require assembly, if you need help this can be advised at the time of order. A service fee for assembly/installation may also apply. Delivery lead times may apply to some items, this can be confirmed at the time of order
-
Product Code: 7093606- Type: Monitor Arm - Dual monitor
- Material: Aluminium, plastic, steel
- Miniumum arm hight: 170mm
- Maximum arm hight: 505mm
- Maximum arm reach: 525mm
- Screen size: 13 to 33 inch
- Desk thickness: C-Clamp 10 to 85mm, Grommet 10 to 80mm
- Dimensions: 1100 x 125 x 670mm
- Weight: 6.03kg
- Colour: Silver
- OEM: K55471WW
- Due to freight costs, some orders may incur a delivery charge and this will vary depending on the order, particularly in regional areas. Delivery costs can be confirmed at the time of order. Some items require assembly, if you need help this can be advised at the time of order. A service fee for assembly/installation may also apply. Delivery lead times may apply to some items, this can be confirmed at the time of order
-
Product Code: 7097406- Printing Method: Line thermal printing
- Printing Width: 80mm Paper 72mm; 58mm Paper 54mm
- Dot Pitch: 180 dpi
- Printing Speed: Max. 250 mm/sec
- Number of Columns: 80 mm Paper: Font A - 42 columns, Font B - 56 columns; 58 mm Paper: Font A - 30 columns, Font B - 40 columns
- Character Size: Font A:42/21; Font B:56/28
- Character Table/Code: Refer to Programming manual
- Bar-code Type: UPC-A, UPC-E, EAN8, EAN13, Code 39, Code 93, Code 128, ITF, CODABAR, PDF417, QR Code
- Line Spacing: N/A
- Paper feed method: Friction
- Paper Type: Thermal Paper Roll
- Paper Width: 80+0/-1 mm, 58 mm+0/-1
- Paper Roll Diameter: Max 83mm
- Paper Thickness: 0.06 - 0.08mm
- Paper Supply Method: Easy Paper Loading, Drop in and Print
- Auto Cutter: Guillotine Type
- Indicators/Controls: Power Light, Error Light, Feed Button, on/off Switch
- Emulation: ESC/POS, Star
- Print Buffer: 64KB
- NV Memory: 128K NV Memory
- Sensors: Paper end Sensor, Printer Cover open Sensor
- Drawer Port: 1 port (opens 2 drawers, special cable is needed to open 2 drawers)
- External Device Port: N/A
- Interfaces: USB & RS232(RJ45) & Ethernet
- Driver available: WEPOS, POSReady2009, Windows XP pro, Windows Vis, Windows 7 Pro, POS ready 7, Windows 8 Pro, Industry 8, POS, JPOS, Linux, Cups, Max(OSX10.8), Android SDK
- Power Supply: External AC Adapter; Rated input: AC 90 to 264 V, 50/60 Hz; Rated output: DC24 V, 2.5 A
- External Dimensions: 131(w) x 155(d) x 133(h)mm
- Weight: 0.9 Kg
- Operating Environment: 5-45 deg C, 10-90% RH
- Storage Environment: -10-50 Deg C, 10-90% RH
- Reliability: MCBF Mechanism: 70 mil Lines; Thermal Print head: 150Km; Auto Cutter: 1.5 Mil cuts
- Warranty: 12 months
- Colour: Black
- OEM: GT100UERBL
-
Product Code: 7097891- Type: Height adjustable standing desk
- Dimension: 796 x 320 x 32 - 400mm
- Desktop size: 796 x 320mm
- Desk height range: 368mm
- Desk height adjustment: 32 - 400mm
- Desktop thickness: 8mm
- Weight capacity: 6kg
- Material: Aluminium / Steel / Plastic
- Warranty: 3 years
- Colour: White
- OEM: EDT-LWS.1
- Due to freight costs, some orders may incur a delivery charge and this will vary depending on the order, particularly in regional areas. Delivery costs can be confirmed at the time of order. Some items require assembly, if you need help this can be advised at the time of order. A service fee for assembly/installation may also apply. Delivery lead times may apply to some items, this can be confirmed at the time of order
Computer Accessories